|
|
High Vacuum Biomedical Waste Autoclaves
Commercial Systems * On-Site Systems * Mobile Systems
General Medical Waste Autoclave Setup
BONDTECH TREATMENT TECHNOLOGY Medical Waste Treatment Systems: BONDTECH, developers of the proven technology for medical waste treatment, equipment has the following features: ruggedly designed & built for commercial use; hydraulic quick opening door & locking ring; vacuum pump for high vacuum operation; temperature probes for added protection assurance; programmable control system for precise operation; recorders for date, time, pressure, temperature monitoring; packaged & modularized for easy installation; unique condenser removes excess moisture for less weight at time of disposal; built for safety under ASME Boiler and Pressure Vessel Code, Section VIII, Division 1.
BONDTECH TREATMENT TECHNOLOGY Medical Waste Treatment Systems include custom designed and sized high vacuum, steam autoclaves; external insulation; internal track; complete valves and piping; steam ejector or liquid ring vacuum pump; steam condenser; and loading ramp or lift table. Optional automatic loading systems and low speed, high torque custom designed waste shredders are also available.
Special Equipment Features:
Bondtech's Autoclave systems have been operating commercially for the past ten years. Bondtech's Medical Waste customers include BFI, Waste Management, Med-x, Applied Recovery, Sterimed, Med-Tech to name a few.
Bondtech biomedical waste autoclaves were developed to provide our customers significant cost savings on waste treatment by using high vacuum and high temperature with saturated steam. We can provide commercial, on-site and mobile systems.
Bondtech's biomedical waste autoclaves are capable of treating from 200 Lbs. - 7,000+ Lbs./cycle.
Bondtech provides a hinged mounted door to provide full movement to a full opened position. It is a breech lock type door with a safety interlock to prevent the door from opening while under pressure.
Validation Testing on our Autoclave Systems
An article from Waste Internationale Magazine featuring Bondtech Autoclave Systems
Dont forget, Bondtech offers:
- Turnkey projects
- One stop turnkey equipment supply and installation
- Many accessories, carts, bags, liners, etc. to get your system running, or keep it in perfect operation
- Engineering, maintenance, and consulting
Shredders
Bondtech Shredding
Bondtech engineers have provided solutions to a wide variety of hazardous waste destruction problems; including PCB Contaminated Materials, Radio-active Waste, Chemical Weapons and Medical Waste.
Our test and R&D facilities provide customers and the Bondtech engineers with the technical base to design and manufacture custom reduction systems. Throroughly tested systems reduce start-up and commissioning costs,and ensure 100% reliability in the field. These shredder solutions include one-stage and two-stage solutions.
Medical Waste
Bondtech's Medical Waste Reduction System ensures that Red Bag waste is rendered unrecognizable after sterilization. In a sterile and unrecognizable form the waste can meet regulatory requirements and be safely, inexpensively and locally landfilled -- a cost effective and environmentally secure solution.
The System
Bondtech's Medical Waste Reduction System automatically collects, reduces and conveys the sterilized waste material to a compaction chamber or cart. This two stage system safely and securely handles bags, boxes, and cartons of waste including plastics, paper, steel, and aluminum for hospital environment or regional waste facility.
Custom Systems
The Bondtech two stage system processes sterilized medical waste at rates ranging from 500 to 10,000 lbs/hr. Options for conveying, compacting and adaptation to pre-sterilization shredding processes and other systems expansion are available to accomodate the specific needs of each client.
Bondtech Bin Dumper and Autoclave Carts
Bin Dumpers:
- Heavy Duty
- Built to order
- Economically priced
- Reliable
autoclave systems
Carts:
- Suitable for any type of industrial application
- Aluminum, stainless, or carbon
- Aluminum, stainless, or carbon
Dont forget our cart liners to protect your carts from messy debris.
Bondtech's Hydraulic bin dumper is built to
meet dumping height requirements.
Reusable Medical Waste Containers
Serving the Medical Industry with Quality Rotational Molded Products
Bondtech Reusable Medical Waste Containers
Serving the Medical Industry with Quality Rotational Molded Products
Bondtech offers a comprehensive product line for institutional waste handling. Whether for point of use, bulk collection or transport packaging, Bondtech containers will provide long lasting, cost effective solutions for handling hospital waste and linens.
Container Sizes:
17 gallon
28 gallon
39 gallon
54 gallon
115 gallon
200 gallon
|
28 - 34 - 39 - 54 Gallon Mini Containers
- Leak resistant transport lid with 5/16" gasket
- Four (4) T-lock handles
- Puncture resistant: 3/16" avg. wall thickness
- US DOT Markings:
- Compliance with HM-181 Regulations
- State Environmental Health agencies
- OSHA Markings: Compliance with OSHA Exposure Control Plan
|
115 - 200 Gallon Maxi Containers
- Leak resistant lid
- Four (4) protected casters
- Handle molded within body construction
- US DOT Markings:
- Compliance with HM-181 Regulations
- State Environmental Health agencies
- OSHA Markings: Compliance with OSHA Exposure Control Plan
|
|
3 - 5 - 17 Gallon Sharps Single Deposit Containers
- Locking transport lid
- FDA 510(K) certification
- Leak resistant
- Handle molded within body construction
- Dolly systems available
- Fill markings on container
- US DOT Marking:
- Compliance with HM-181 Regulations
- Environmental Health agencies
|
Universal Transport Cart
- Locking Doors
- Adjustable powder coated shelves
- Center axle
- Dia.: 32.5"W x 84"H x 61"L
- Net Wt.: 185 lbs.
Restrictive Lid
Multiple sizes of restrictive lids are available for the Micro, Mini and Single Deposit Containers
|
|
Schaefer SAFECART
MEDICAL WASTE HANDLING STORAGE AND SHIPPING CONTAINER MEDICAL WASTE CART
This tough container safely stores and ships infectious medical waste. Made of high density polyethylene, it is resistant to punctures, chemicals and harsh cleaning agents, Its user-friendly design makes it easy to handle, and is sized to cube out truck space.
It's compatible with a variety of lifter systems which makes handling simple and efficient and reduces on-the-job injuries. We guarantee its quality and performance for one year. These units meet or exceed all E.P.A., O.S.H.A. and D.O.T guidelines.
APPLICATION FEATURES
- Spill proof
- Leak proof Seal (comes with lid clamps)
- Tamper Proof- Stackable
- High Cube Utilization
- Rodent Proof- Slim Line Design
- Roto Lock
- 8" Rubber Wheels
|
LID
Attached lid is reinforced for added stability when stacked.
BODY
Injection molded of high density, 100% polyethylene. Highly durable, resistant to punctures and to damage from most chemicals
No drilled holes assure container is leakproof.
|
|
Schaefer TM Red Containers 96
MEDICAL WASTE 96 gallons Schaefer TM Red Containers Med 360
APPLICATION FEATURES
- Meets all D.O.T Regulations
- Stackable, Slim Line Design, Easy to handle
- 8" Rubber Wheels Standard, Additional Sizes Available
- Roto-Lock for Tamper Proofing
- Custom Hot - Stamping Available
- Dimension: 24"Wx35"Dx43"H
- Exclusive 96 Gallon Schaefer TM Container on the Market
- Standard Dry Van loading option: appox. 136 Containers
- Approx. Standards 53' Dry Van Dimension: 52'6"L x 102"W x 102"H 3800ft cube Capacity
|
|
|
Schaefer TM Red Containers 200
MEDICAL WASTE 200 gallons Schaefer TM Red Containers Med 770 HD
APPLICATION FEATURES
- Meets all D.O.T Regulations
- Leak-proof, Tamper-Proof, Puncture Resistant, Spill-Proof, Reinforced
- 4" Rubber Wheels Standard, Additional Sizes Available
- Useful for Large Volumes of Waste
- Custom Hot - Stamping Available
- Ideal for using one container per floor
- Exclusive 200 Gallon Schaefer TM Container on the Market
- Standard Dry Van loading option: appox. 80 Containers
- Approx. Standards 53' Dry Van Dimension: 52'6"L x 102"W x 102"H 3800ft cube capacity
-
|
|
REUSABLE LEAKPROOF SPILLPROOF LOCKABLE STACKABLE - EASY TO MANEUVER THROUGH STANDARD DOORWAYS
| SAFECART SPECIFICATIONS - MODEL/CAPACITY (LITRES) |
| CAPACITY |
140 |
360 |
| DEPTH |
553mm |
874mm |
| WIDTH |
483mm |
600mm |
| HEIGHT |
1076mm |
1100mm |
| WEIGHT |
11.2kg |
23kg |
| WHEEL DIAMETER |
200mm |
200mm |
|
| SAFECART SPECIFICATIONS - MODEL/CAPACITY (Gallons) |
| CAPACITY |
38 |
96 |
| DEPTH |
22 |
35 |
| WIDTH |
19 |
24 |
| HEIGHT |
42 |
43 |
| WEIGHT |
29 |
51 |
|
Composites, Glass Laminating, and Aerated Concrete Autoclave Systems
Engineering Design
Bondtech manufactures integrated systems to meet the specifications of the processing industries. Bondtech's versatility in refurbishing existing autoclave systems makes the Corporation a leader in the industry.
Design Features
Bondtech is a sole supplier of new and refurbished autoclaves and pressure vessels. The single source capability represents direct control starting with coordinated mechanical and metallurgical design through the final test of the complete system.
When reconditioning an existing system, Bondtech uses the most advanced technology to bring the autoclave up to today's standards. When the autoclave is completed, the unit will not only look like new, but it will also perform and last like a new unit. When refurbishing a unit, we will take into consideration our customer's unique requirements as well as budget considerations.
Bondtech's Standards
All of our autoclaves, new or used, will have the highest manufacturing standards, and will be fabricated in accordance with the following qualified codes:
- ASME Section VIII, Division I, Boiler and Pressure Vessel Code
- ASTM - American Society for Testing Materials
- AISC - American Institute of Steel Construction
- National Board of Boilers and Pressure Vessel Inspectors "R" stamp
Bonding System
Size: 10' Dia. x 35' Long 150 PSI, 450 Deg. F. Manufactured for Bonded Technology
Refurbished System
Size: 3' Dia. x 10' Long 150 PSI, 650 Deg. F. Refurbished autoclave system with state-of-the-art computer controls.
Refurbished for Sioux Mfg.
Rubber Vulcanizer
New Composite System
Size: 8' Dia. x 8' Long 250 PSI, 900 Deg. F.
New Composite System manufactured for an aircraft company
Bondtech's Advantages
- State-of-the-art
- Cost Savings
- Custom Design
- Modifications and Repairs
- Modifications and Repairs
- Shorter Manufacturing Leadtime
- Single Source
The Rubber Industry
Equipment Features:
Heating Systems
- Indirect Heat: Electric or Indirect Steam
- Direct Heat: Direct Steam
Quick Opening Door
- Hydraulic powered door for quick and safe open/lock
- Locking ring rotation only - Extends gasket life
- O-ring gasket - Long lasting
- No air system required for gasket seal
Controls
Basic Temperature/Pressure Controls
- Prepackaged in C/S Nema 12 Enclosure
- 24 hour circular chart recorder
Programmable Logic Controller (PLC)
- Maximum Flexibility to program autoclave process cycle
- Optimization of autoclave cycle for desired results
- Effective tool for achieving high quality products
- Modem hookup capabilities
Quality Control and Safety
- ASME & National Board Certified
- Safety interlocks
- Safety relief valve
- Complete acceptance testing prior to shipment
- Engineers available for on-line technical support
Custom Engineering
- In-house Engineering
- Customize Engineering Capabilities
- Manufactured to your special capabilities
Bondtech High Heat Liners
Ever melted those cheap liners and bags when autoclaving? Is cleaning your messy autoclave carts a bother? Protect your investment! Get Bondtech's high heat and easy to install "PRO-TECH" liners for your autoclave carts or other high temperature lining purpose. The Bondtech "PRO-TECH" liners provide several advantages to enhance your operation:
- Extend the life cycle of every cart utilizing the "PRO-TECH" liner.
- Reduce wear and tear on your dumper by dumping the treated waste easily.
- Enhance perception of clean/safe operation: Maintain carts free of debris.
- Eliminate a potential source of nuisance odors.
- Eliminate labor required to periodically remove waste debris from carts.
- Consistent full capacity utilization - eliminating waste build-up inside carts.
- Reduce occupational exposure, potential injuries related to cleaning waste from carts.
Bondtech's "PRO-TECH" liners are custom made to meet our customer specifications. This means you get the size you need.( Gauge, printed or un-printed, temperature strips, color, etc. are optional features).
As Easy As 1,2,3.
1. Simply Line the empty autoclave cart
2. Deposit waste into bin and treat
3. Simply dump the
treated waste
Custom Bio-Hazard Red Bags
Get the bag you want when you want it! Bondtech is your choice manufacturer of redbag and other poly bags. Our facility allows Bondtech to create the bag of your choice. We can provide custom size, color, thickness, or print you may need. The Bondtech bags provide several advantages to enhance your operation:
- Reduce cost by getting the right bag for the right purpose.
- Have your bags packaged the way you need them
- On a roll
- In individual packets
- In a box
- Get the right size! Bags that fit your containers -- No more bags just a bit too small, or way too big.
- Buy only the features you need on your bags.
- Get your bags when you need them.
Bondtech bags are custom made to meet our customer specifications. ( Gauge, printed or un-printed, temperature strips, color, etc. are optional features).
Our plant allows us to create bags in custom sizes
We can provide excellent service and a high quality bag
Common bag sizes are in
stock and ready to ship
Availability
Inventory
General performance
Process Description: Bondtech Autoclave System's are high vacuum, high pressure systems. bondtech autoclaves are subject to a pre-vacuum cycle, pulsating saturated stream cycle, and a post vacuum cycle to facilitate faster and more uniform penetration of steam into the medical waste to be treated.
Bondtech Autoclave System's high vacuum is achieved by using a top of the line liquid seal vacuum pump or a steam ajector.
Bondtech Autoclaves system's locking ring, quick opening door is used in the most sophisticated aerospace autoclaves, and designed with safety in mind. In this particular design, the door is stationari and the locking ring is mounted on the peruphery of the vessel and is rotted through a short arc by hydraulic or pneumatic cylinders locate on the side of the vessel.
Contact person: Elsa Brown
E-mail: elsabrown@bondtech.net
Phone: 606-677-2616
Autoclaves
Commercial Systems * On-Site Systems * Mobile Systems
Bondtech is the leader in the autoclave industry.We can provide autoclaves for many industries including:
- Bonding
- Laminating
- Wood Treating
- Vacuum Impregnation
- Curing
- Sterilizing
- Vulcanizing
- Yarn Setting
Glass Lamination
- Designed to meet your load and cycle times
- Heating by electric, steam, or gas
- Pressures per your requirements
- Simple operation via computer controls
- Guaranteed soak by glass temperature
- Turnkey installation
- Affordable
Bondtechs glass laminating autoclaves standout as the highest quality and most affordable units on the market.
Bondtech takes pride in the innovative autoclave design and material selection that results in trouble-free operation and reduced maintenance time/cost in the future. Bondtech standardizes on top-quality components on even our most affordable units.
Turn-key installation
Bondtech provides turnkey installation of all our autoclave systems. From site plan and preparation to training, ASC provides everything you need to receive a fully installed and commissioned autoclave.
Simple operation with PC controls
Bondtech utilizes its CPC computer control system to control all new glass laminating autoclaves. CPC computer control system is the worlds leading PC system for autoclave control
Adherence to specification
We design and manufacture our autoclaves specifically to your processing and operational specifications. You can be assured that ASC glass laminating autoclaves will not only meet, but also exceed all of your specific requirements.
Auxiliary systems
No glass laminating autoclave is complete without the proper auxiliary systems for vacuum supply, pressurization supply, and cooling water supply. ASC can provide closed-loop cooling systems, vacuum systems, compressor systems, liquid nitrogen tanks and vaporizers, cold traps, and any auxiliary component or system you need.
Affordability
Bondtech autoclaves are consistently the most affordable autoclave for composite curing and bonding. It has always been our policy and philosophy to provide the highest-quality product at the most affordable price.
Dispoz-A-Fone
Standars line of phones
Dispoz-A-Fone is your answer for "Throw-away" hospital telephones. These telephones are designed for use worldwide by patients in hospitals in order to address the problem of the spread of infectious diseases. Patient telephone theft has also increased the need for hospitals to purchase Dispoz-A-Fone for every room in order to reduce the capital outlays.
Dispoz-A-Fone has several advantages:
- Highest Quality Telephone
- Lowest Cost
- Immediate Delivery
- Excellent Customer Service
- Screen Printing And Colors (for advertising) is Available in a minimum quantity order.
- Hearing Aid Compatible
- Available in Two Models
- Touch-tone with Last Number Redial
- Touch-tone with Hi/normal volume
- FCC approved
- 6 month Warrantee
Specifications/Features:
- Dynamically styled for comfortable hand-holding
- Push-button keyboard
- Ringer shut off when you wish not to be disturbed
- Power directly from telephone line, unaffected by power failure
- Automatic cut-off when placed on flat surface
- Wall mount holder included
- In-use LED indicator
- Mute button for privacy
- Memory redial button to recall the last number dialed
- Weight: Approx. 230g
- Dimensions: 205 (L) x 57 (W) x 35 (H) mm
- Packing: 50 sets/carton
- G.W. 13.5 kgs
- N.W. 12.5 kgs
- Meas. 44.5 (L) x 27 (W) x 47 (H) cm
DeLuxe line of phones
Dispoz-A-Fone is also offering a deluxe line of two-piece phones with more features. These phones are of the highest quality, hearing aid compatible, FCC & ETL approved, and carry a 6 month warrantee.
Dispoz-A-Fone Deluxe Phones have many advantages:
- Lighted Keypad
- Last Number Redial
- Visual Ringer Indicator*
- Mechanical bell ringer
- Large push button keypad
- 3 Position Adjustable volume control**
- Tone/Pulse switchable
- Desk or wall mountable
- Braile on #5 button
- Extra long coil and line cords
- Mute and Flash buttons
- Ringer on/off switch
*Visual Indicator on Model LI82VC only
**Adjustable Hi/Lo Volume on Model DP5203H
Dispoz-A-Fone is perfect for:
- Hospitals
- Nursing Homes
- College/Student Dorms
- Motels and Hotels
- Anywhere large number of phones are used
Revenue Increases
Increase your revenue by providing your patients, guest, or residents with telephone service using a quality telephone from Dispoz-A-Fone. Through different ways of charging, it is possible for patients to take home a high quality, attractive phone with a limited warranty. This will yield you a consistent income as people use your telephone services.
|
Autoclaves
